8.3
The Display Group
The Display group allows the operator to display team declarations,
competitor lists, event results, match position, completed and remaining
events. Some of the displays are printed automatically via the prompters.
All the information in the Display group can be printed by an operator
using the F8 key if required.
8.3.1Team Declaration
The Team Declaration item presents a menu of the Team Declared.
E.G.
See:8.4.5, 8.5.6.4, Appendix B4
8.3.1.1-8Club Declaration
Selecting any team from the Team Declaration menu will display the desired
declaration. If the meeting organisers do not have any team declaration sheets for
team managers, this item can be used to print a blank declaration or print a tidier copy
using the F8 key. The date and time are printed to show which of potentially several
printed declarations is the most recent.
E.G. Display of a partial SW team declaration.
8.3.2List of Competitors
The operator can display the competitors declared for any event by selecting this item
and then the desired event from the Event menu. The list displayed is exactly the
same as that printed automatically by the List Prompter. This feature may be of use
if the operator/announcer wishes to read directly from the screen or the List Prompter
has been turned off.
Alternatively, this display box can be used to reprint any list which may have been
updated as the result of any changes after the normal printout from the List Prompter.
E.G. Lane draw for the 100M when a correct lane draw exists.
E.G. List of 100M competitors when the lane draw does not exist.
See: 4.3, 6.1
8.3.3Event Result
The operator can display an event result for any event by selecting this item and then
the desired event from the subsequent EVENT menu. The result displayed is exactly
the same as that printed automatically by the result prompter and printed on the final
results and may be of use if the result prompter has been turned off.
E.G. Typical on screen display for an event result.
See: 4.3, 6.3
8.3.4Match Position
This item allows the operator to display the current match points and positions at any
time. The display is exactly the same as that printed automatically by the Result
Prompter after entry of each event result. The number of completed events will be
shown until all events are complete. The number of sections in the display will vary
depending on the round, the number of events entered and any ties.
For Cup and promotion matches where a points tie exists additional columns will show
how many first, second etc places each team has achieved. This is intended to assist
in resolving the tie.
This display may be of use if the operator/announcer wishes to read directly from the
screen or the Result Prompter has been turned off.
8.3.4.ALeague Match Position
For round 1 and when previous round results can not be found the display will consist
of two columned sections titled, THIS MATCH and LEAGUE STANDINGS.
Where all previous round results can be found a third columned section, PRIOR
STANDINGS, will be added when 5 or less event results remain to be entered. This
is also true before any event results have been entered thus allowing the operator to
ensure all abbreviation are the same as previous round(s).
E.G. A typical display with 2.5 event remaining.
See: 8.1.4, 8.2.8, 8.3.5, 8.3.6
8.3.4.BCup Match Position
The display will show all the points for all teams.
E.G. A typical KM display
See: 8.3.5, 8.3.6
8.3.5Completed Events
The Completed Events item displays the total number and view the specific
events completed. If the event is complete, ie. results entered, then a
cross will appear at the appropriate point. Non timetabled events are
marked with a dash.
E.G. A typical display of completed events,
in this case after 14 and two half events have been entered.
See: 8.3.4, 8.3.6
8.3.6Remaining Events
The Remaining Events item displays a list of remaining events and events
in progress and event based on the computer time, the number of event results
entered and event starting times.
E.G.Display of the remaining and in progress at 4.07.
See: 8.3.4, 8.3.5
8.3.7Guest Results
The Guest Results item presents a menu which allows for selection and subsequent
display of an entered guest result.
E.G. Displaying a guest result.
See: 8.2.6
8.3.8Statistics
The Statistics item displays the teams in the current match. Selection of a
team will display brief statistics for that team.
8.3.8.1-8Team Statistics
The Team Statistics item displays a summary the number of athletes for the
previously selected team. This is broken down fully indicating the total
events, points scored, maximum possible points and percentages achieved
all athletes in the team. This item may be of use in identifying misspelt
names, if the relays are not at the bottom of the list the team declaration
contains misspelt names. The only exception to this is when a relay runner
does not take part in an individual event.
E.G. Typical display for team statistics.
See: 8.1.7.1-8
8.3.9Full Timetable
This will display the current timetable by event and time.
8.3.10Draws
This item allows part or all of the currently selected event draws to be
displayed if all the event draws have been set.
8.3.10.1Track Draw
This item will display the lane draws for all the track events, in timetable
order, if all the lane draws have been set. The list may assist the
marksman/starter when athletes line up on the start line.
8.3.10.2Field Draw
This item will display the competing order for all field events, in timetable
order, if all the lane draws have been set. The list may be of use to field
judges or athletes.
8.3.10.3Full Match Draw
This item will display the track and field draws for all events.
8.3.11AAA Grades
This item displays the AAA grades for all events.
8.3.12Program Files
This option displays all the files that the program is currently using.
